HV-10

10,000 lb Hydraulic Recovery Winch

5.9 in³ / rev highly efficient and constant operating torque motor with 10,000 lb capacity.

Hardened 2 stage planetary gear train with 16:1 gear ratio provides faster line speed.

Turn clutch by a ergonomic T-handle for rapid wire rope payout.

Drag brake and over-center valve provided for holding full load.

Great for severe duty trailers, roll-back carriers, and commercial recovery application.

Meets SAE J706 revised AUG2003, CE Machinery Directive 2006/42/EC and EN 14492-1 Power Driven Winches.

Description

Specification:

Part number: PN 682546 (Std. drum) / PN 683129 (Std. drum – Clutch in left side)
Rated line pull: 4,535 kg / 10,000 lb (SAE J706 rating)
4,300 kg (EN 14492-1 rating)
Line speed (at 1^st layer of rope) : 14 mpm at 60 l/min (46 fpm at 15.9 g/min)
Operation pressure: 150 bar / 2,175 psi
Max oil flow: 60 l/min (15.9 g/min)
Hydraulic motor: 97.3 cm³/rev (5.9 in³/rev)
Gear ratio: 2-stage planetary gear 16:1
Winch construction: Aluminum die cast housings with steel drum
Clutch (Freespooling): Rotating ring gear
Brake: Spring applied drag brake together with over-center valve supplied
Rotation of winch: Wire rope shall be under-wound orientation only
Drum barrel diameter: 102 mm (4″)
Drum flange diameter: 201.5 mm (7.9”)
Distance between flanges: 253 mm (10″)
Mounting bolt pattern: 291.6 x 171.2 mm (11.5” x 6.7”)
374.2 x 114 mm (14.7” x 4.5”)
Wire rope recommended:
11 mm x 27 m (7/16″ x 89′), 1,960 N/mm² (EIPS) grade with a minimum breaking strength of 84.4 kN (18,939 lbf) required for SAE J706 and EN 14492-1 ratings.

Packing Dimensions: